Welcome to the the whole new experience that is
Propshield Antifouling Grease
Propshield is a
marine product for the private and commercial boat
owner alike. It is a lanolin based antifouling
grease and can be used to prevent and limit both
barnacles, electrolysis and oxidisation.
Please note Propshield is no substitute for a good
bonding system, the product will work in conjunction
with your anodes to eradicate electrolysis.
It is compatible with all types of stern gear and
various materials from bronze propellers to painted
surfaces found on outboard legs.
Propshield is a consumable product and needs
to be applied once a season or if your vessel is in the water all year
round twice a year. A more detailed application and coverage guide can
Our customers report that they are delighted
with the spectacular results on their stern gear after protecting it
with Propshield, they all experienced significantly reduced barnacle
encrustations, oxidisation and electrolysis! If you wish to find out
more about this fabulous new product then please follow the Useful Links
on the right or just browse through the site at your leisure.
Click here to Buy Propshield
What you get for
One 375g or 175g tub of
Propshield Antifouling Grease
A very detailed
instruction sheet with a step by step guide to application,
reapplication and coverage.
plus a pair of latex
375g Tub - Treats a 12 metre twin screw vessel for 6-7
months coating both propellers, both shafts and both rudders
OR Treats two outdrive legs below the water line on a 10
metre vessel for 6-7 months.
175g Mini-Tub - Treats a 12 metre single screw vessel for 6-7
months coating one propeller, one shaft and one rudder OR
Treats one outdrive leg below the water line on a 10 metre
vessel for 6-7 months.
vessels - Will have enough Propshield for 2 or more
Our research and development
programme is ongoing and we will bring new products to the
market place as they are developed. We are committed to
providing you with products that meet your boating needs and
to this end we need customer
feedback. It is essential that we
build a picture of how the product performs in different
parts of the World. Some areas will need to recoat their
stern gear more frequently while others may get an entire
season or more from one application. This difference is
normal for any type of antifouling and different makes
perform better in some areas than others. Whilst we are more
than confident that Propshield will easily tackle the very
worst of fouling it will be extremely helpful to you, our
customer, that we can provide a more accurate application
guide depending on your locale. We will endeavour with your
help to build a map of the types of fouling regions to
determine what coating regimes will be required in different
areas. We hope you appreciate that we can only test in so
many places to determine an approximate coating regime
and we have done this in very high fouling areas.
We are aware that oysters are a problem in certain areas and
we are undertaking a programme of research that will
determine its effectiveness within these regions for this
type of contamination.
If you have any comments in this
regard please let us know what you would like as a
preference e.g. larger or smaller sizes, different type of
container, better instructions etc. You can send us your
comments by submitting a feedback
or a contact us
form, alternatively you could simply send us an email to